{"title":"Single-Ply Flat Roof Membranes (TPO \u0026 PVC)","description":"\u003cp\u003eHot-air welded single-ply membranes for mechanically fixed and bonded flat roof systems, including polyolefin (TPO\/FPO) and PVC rolls. These are installer-grade products: they need welding equipment, suitable fixings and a properly designed roof build-up.\u003c\/p\u003e","products":[{"product_id":"pvc-single-ply-roofing-membrane","title":"PVC Single-Ply Roofing Membrane – Hot-Air Welded Flat Roof System, Mechanically Fixed \u0026amp; Bonded","description":"\u003cp\u003eSingle-ply PVC is the membrane contractors reach for when a flat roof needs a genuinely welded, monolithic waterproofing layer rather than taped or adhesive-jointed sheets.\u003c\/p\u003e\n\u003cp\u003eEvery seam is hot-air welded into a single homogenous skin, so there's no seam tape to fail years down the line — the roof is effectively one continuous sheet of plastic from edge to edge.\u003c\/p\u003e\n\u003cp\u003eIt's a different installation discipline to EPDM rubber (welding equipment and training rather than a roller and adhesive), which is exactly why it holds a separate, established place in UK flat roofing rather than competing head-on with our EPDM range.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible PVC membrane, 1.5mm gauge, in five real fixing\/construction systems: loose-laid ballasted, mechanically fixed, elastomeric-modified mechanically fixed, fully adhesive-bonded, and fleece-backed\u003c\/li\u003e\n\u003cli\u003eHot-air welded seams form a continuous, monolithic waterproofing layer\u003c\/li\u003e\n\u003cli\u003eAnthracite Grey or Dark Grey depending on system (see specification table)\u003c\/li\u003e\n\u003cli\u003eSupplied in trade rolls — 1.05m or 2.1m widths\u003c\/li\u003e\n\u003cli\u003eSuitable for new-build and refurbishment flat roofs, typically over insulation on a warm roof build-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003cth\u003eFixing method\u003c\/th\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003cth\u003eRoll size\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD — Loose-Laid\u003c\/td\u003e\n\u003ctd\u003eBallasted (requires ballast layer over membrane)\u003c\/td\u003e\n\u003ctd\u003eAnthracite Grey\u003c\/td\u003e\n\u003ctd\u003e1.05m x 20m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMF — Mechanically Fixed\u003c\/td\u003e\n\u003ctd\u003eMechanically fastened through insulation to deck\u003c\/td\u003e\n\u003ctd\u003eAnthracite Grey\u003c\/td\u003e\n\u003ctd\u003e1.05m x 20m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEMF — Mechanically Fixed\u003c\/td\u003e\n\u003ctd\u003eElastomeric-modified, mechanically fastened\u003c\/td\u003e\n\u003ctd\u003eDark Grey\u003c\/td\u003e\n\u003ctd\u003e1.05m x 20m \/ 2.1m x 20m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEBM — Adhesive Bonded\u003c\/td\u003e\n\u003ctd\u003eFully bonded with contact adhesive\u003c\/td\u003e\n\u003ctd\u003eDark Grey\u003c\/td\u003e\n\u003ctd\u003e1.05m x 20m \/ 2.1m x 20m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType A — Fleece-Backed\u003c\/td\u003e\n\u003ctd\u003eBonded or mechanically fixed via fleece backing\u003c\/td\u003e\n\u003ctd\u003eAnthracite Grey\u003c\/td\u003e\n\u003ctd\u003e1.05m x 15m \/ 2.1m x 15m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctr\u003e\n\u003cth\u003eGauge\u003c\/th\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeaming\u003c\/th\u003e\n\u003ctd\u003eHot-air welded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage per roll\u003c\/th\u003e\n\u003ctd\u003e1.05m rolls: 21m² (20m length) \/ 15.75m² (15m length). 2.1m rolls: 42m² (20m length) \/ 31.5m² (15m length)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is this different from your EPDM rubber membrane?\u003c\/strong\u003e Both are genuine single-ply waterproofing systems, but they join differently.\u003c\/p\u003e\n\u003cp\u003eEPDM sheets are jointed with adhesive tape or liquid-applied seam adhesive; PVC sheets are hot-air welded into one continuous skin.\u003c\/p\u003e\n\u003cp\u003ePVC also tends to be specified where a lighter colour or a fully bonded\/mechanically fixed system is wanted, while EPDM is generally the more DIY-accessible option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I install this myself?\u003c\/strong\u003e Realistically, no — not to the standard the material is capable of.\u003c\/p\u003e\n\u003cp\u003eHot-air welding PVC seams correctly needs proper welding equipment and hands-on training; a poorly welded seam is a leak waiting to happen.\u003c\/p\u003e\n\u003cp\u003eThis is a trade\/contractor-installed product, unlike our EPDM range which is designed for competent DIY installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich fixing system should I choose?\u003c\/strong\u003e Mechanically fixed (MF\/EMF) is the most common choice for refurbishment over an existing deck and copes well with movement.\u003c\/p\u003e\n\u003cp\u003eFully bonded (EBM) gives the flattest, most wind-resistant finish and suits new-build.\u003c\/p\u003e\n\u003cp\u003eLoose-laid ballasted (D) is used where the roof structure can carry the extra weight of a stone or paving ballast layer and mechanical fixing isn't practical.\u003c\/p\u003e\n\u003cp\u003eFleece-backed (Type A) adds an extra protective layer under the membrane, useful over slightly uneven decks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a vapour control layer underneath?\u003c\/strong\u003e Yes, on a warm roof build-up — fit a VCL below your insulation, then this membrane goes above the insulation as the top waterproofing layer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size roll do I need?\u003c\/strong\u003e Measure your roof area and add roughly 10% for laps, upstands and waste.\u003c\/p\u003e\n\u003cp\u003eA 2.1m wide roll covers ground faster with fewer seams than the 1.05m width, which matters on larger roofs where fewer welded joints means less on-site labour.\u003c\/p\u003e\n\u003cp\u003eBuilding a full warm roof build-up? Start with our \u003ca href=\"\/products\/polythene-vapour-control-layer-vcl-4m-x-25m\"\u003epolythene vapour control layer\u003c\/a\u003e, add our \u003ca href=\"\/products\/pir-insulation-board-foil-faced-2400-x-1200mm\"\u003ePIR insulation board\u003c\/a\u003e, then finish with this membrane as the top waterproofing layer.\u003c\/p\u003e\n\u003cp\u003eThis is a genuinely different single-ply system to our \u003ca href=\"\/products\/300g-fire-rated-grp-roofing-kit-with-tools-broof-t4\"\u003eGRP fibreglass kits\u003c\/a\u003e and EPDM range — it suits projects where a contractor-installed, hot-air-welded finish is specified.\u003c\/p\u003e\n\u003cp\u003ePrefer a polyolefin? Our \u003ca href=\"https:\/\/rubberroofuk.uk\/products\/tpo-fpo-single-ply-flat-roof-membrane-reinforced-white-20m-roll\"\u003ewhite TPO\/FPO single-ply membrane\u003c\/a\u003e is a plasticiser-free, hot-air welded alternative in a different polymer (the two are not welded to each other, so choose one per roof).\u003c\/p\u003e","brand":"Rubber Roof UK","offers":[{"title":"D Loose-Laid (Anthracite Grey) \/ 1.05m x 20m","offer_id":46010034192575,"sku":"RRUK-PVC-D-105","price":899.99,"currency_code":"GBP","in_stock":true},{"title":"MF Mechanically Fixed (Anthracite Grey) \/ 1.05m x 20m","offer_id":46010034225343,"sku":"RRUK-PVC-MF-105","price":899.99,"currency_code":"GBP","in_stock":true},{"title":"EMF Mechanically Fixed (Dark Grey) \/ 1.05m x 20m","offer_id":46010034258111,"sku":"RRUK-PVC-EMF-105","price":899.99,"currency_code":"GBP","in_stock":true},{"title":"EMF Mechanically Fixed (Dark Grey) \/ 2.1m x 20m","offer_id":46010034290879,"sku":"RRUK-PVC-EMF-210","price":1509.99,"currency_code":"GBP","in_stock":true},{"title":"EBM Adhesive Bonded (Dark Grey) \/ 1.05m x 20m","offer_id":46010034323647,"sku":"RRUK-PVC-EBM-105","price":899.99,"currency_code":"GBP","in_stock":true},{"title":"EBM Adhesive Bonded (Dark Grey) \/ 2.1m x 20m","offer_id":46010034356415,"sku":"RRUK-PVC-EBM-210","price":1709.99,"currency_code":"GBP","in_stock":true},{"title":"Type A Fleece-Backed (Anthracite Grey) \/ 1.05m x 15m","offer_id":46010034389183,"sku":"RRUK-PVC-TA-105","price":919.99,"currency_code":"GBP","in_stock":true},{"title":"Type A Fleece-Backed (Anthracite Grey) \/ 2.1m x 15m","offer_id":46010034421951,"sku":"RRUK-PVC-TA-210","price":1839.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0598\/1804\/9727\/files\/pvc-single-ply-membrane-hot-air-welded-flat-roof.jpg?v=1786696661"},{"product_id":"tpo-fpo-single-ply-flat-roof-membrane-reinforced-white-20m-roll","title":"TPO \/ FPO Single-Ply Flat Roof Membrane – Reinforced White, Heat-Welded, 20m x 1.05m Roll (21m²)","description":"\u003cp\u003eIf you have priced up a warm flat roof and been told the waterproofing needs to be a welded single-ply rather than a taped or bonded sheet, this is the roll you would be buying: a white, polyester-reinforced TPO\/FPO (flexible polyolefin) membrane, 20m long by 1.05m wide, that is mechanically fixed to the deck and then joined into one continuous covering with a hot-air welder.\u003c\/p\u003e\u003cp\u003eIt is a trade-installer product, not a DIY kit. The seams only perform if they are welded correctly, so please read the \"Before you order\" section below before you add it to your basket.\u003c\/p\u003e\u003ch2\u003eWhy choose a polyolefin (TPO\/FPO) single-ply?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlasticiser-free formulation.\u003c\/strong\u003e Unlike PVC single-ply, polyolefin membranes do not rely on plasticisers to stay flexible, which is the main reason contractors specify them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelded, monolithic seams.\u003c\/strong\u003e Adjacent sheets are joined by hot-air welding, so the roof is waterproofed by a fused joint rather than by adhesive or tape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolyester net reinforcement.\u003c\/strong\u003e The scrim is what allows the sheet to be fixed mechanically through the membrane edge and to resist wind uplift loads on the fixings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVapour permeable.\u003c\/strong\u003e The membrane is described by the supplier as vapour permeable, which suits correctly designed roof build-ups where condensation risk has been assessed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite upper surface, black underside.\u003c\/strong\u003e The light finish reflects more solar heat than a dark membrane, and gives a clean, uniform look on visible roofs and parapet-edged extensions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere it is used\u003c\/h2\u003e\u003cp\u003eMechanically fixed single-ply roofs over concrete, timber or metal decks: flat-roof extensions, garages, outbuildings and larger domestic, commercial and industrial roofs, on both new-build and refurbishment projects. Upstands, parapets and penetrations are formed by cutting and welding the same membrane.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMembrane type\u003c\/th\u003e\n\u003ctd\u003eFlexible polyolefin (FPO \/ TPO) single-ply roofing membrane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003ePolyester net (scrim)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll length\u003c\/th\u003e\n\u003ctd\u003e20 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll width\u003c\/th\u003e\n\u003ctd\u003e1.05 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal roll area\u003c\/th\u003e\n\u003ctd\u003e21 m² (before overlaps, upstands, cutting and waste)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUpper surface\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnderside\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJointing\u003c\/th\u003e\n\u003ctd\u003eHot-air welded seams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing method\u003c\/th\u003e\n\u003ctd\u003eMechanically fixed (fixings and plates not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable decks\u003c\/th\u003e\n\u003ctd\u003eConcrete, timber, metal (with an appropriate build-up)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormulation\u003c\/th\u003e\n\u003ctd\u003ePlasticiser-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003ctd\u003eManufacturer\/supplier-stated compliance with EN 13956\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 roll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMembrane thickness is not published by the manufacturer for this product, so we do not quote one. If a specifier needs it, ask us before ordering.\u003c\/p\u003e\u003ch2\u003eHow much do I need?\u003c\/h2\u003e\u003cp\u003eOne roll is 20m x 1.05m, a nominal 21m². Your finished roof will always use more than its plan area: sheets must overlap so the seams can be welded, and the membrane also runs up parapets, kerbs and around outlets. Work out the roof in 1.05m-wide strips, add the seam overlaps and upstand heights, then add an allowance for cutting waste. For example, a 3m x 6m roof needs three 6m strips laid across its 3m width, about 18m of the 20m roll, before any parapet upstands or waste are added, so even a small roof can run close to a full roll and larger roofs need several. Measure your actual layout rather than dividing the roof area by 21.\u003c\/p\u003e\u003ch2\u003eBefore you order: what this is and is not\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMembrane only.\u003c\/strong\u003e The roll does not include insulation, vapour control layer, fixings and plates, seam cleaner, edge trims, outlets or detailing accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt needs a hot-air welder.\u003c\/strong\u003e The seams must be welded with suitable single-ply welding equipment by a trained installer, following the manufacturer's system instructions for temperatures, seam widths and fixing patterns. A heat gun and a roller used by an inexperienced fitter is not a substitute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe build-up must be designed.\u003c\/strong\u003e Deck type, insulation, vapour control, fixing schedule and wind-uplift requirements vary by roof and location. If you are not sure, have the roof specified before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck fire and regulatory requirements.\u003c\/strong\u003e We do not quote a fire classification for this roll. If your roof is close to a boundary or needs a specific external fire rating, confirm the rating of the complete system with the manufacturer or your building control officer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for DIY beginners or stick-down repairs.\u003c\/strong\u003e If you want a DIY-friendly flat roof, a one-piece EPDM rubber system is a simpler choice, such as our \u003ca href=\"https:\/\/rubberroofuk.uk\/products\/1-2mm-epdm-rubber-roofing-membrane\"\u003e1.2mm EPDM rubber roofing membrane\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation overview\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003ePrepare a clean, sound, dry deck and lay the vapour control layer and insulation for a warm roof.\u003c\/li\u003e\n\u003cli\u003eRoll the membrane out in 1.05m strips with the specified side laps, and fix through the lap with the system's fixings and plates.\u003c\/li\u003e\n\u003cli\u003eHot-air weld each overlap to form a continuous seam, and probe-check the welds.\u003c\/li\u003e\n\u003cli\u003eForm upstands, corners and penetrations from cut pieces of the same membrane, and weld them in.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eRelated products\u003c\/h2\u003e\u003cp\u003eA welded single-ply is only one layer of a warm roof. These items from our range fit into the same build-up:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/rubberroofuk.uk\/products\/polythene-vapour-control-layer-vcl-4m-x-25m\"\u003ePolythene vapour control layer\u003c\/a\u003e for laying on the deck beneath the insulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/rubberroofuk.uk\/products\/pir-insulation-board-foil-faced-2400-x-1200mm\"\u003eFoil-faced PIR insulation board\u003c\/a\u003e for the warm-roof layer between the vapour control layer and the membrane.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/rubberroofuk.uk\/products\/pvc-single-ply-roofing-membrane\"\u003ePVC single-ply roofing membrane\u003c\/a\u003e if you prefer a PVC system. Note that PVC and polyolefin membranes are different polymers and are not welded to each other, so choose one type per roof.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs this the same as a PVC single-ply membrane?\u003c\/h3\u003e\u003cp\u003eNo. Both are hot-air welded single-ply membranes, but this roll is a polyolefin (TPO\/FPO) and is plasticiser-free, while PVC membranes contain plasticisers. The two should not be mixed on the same roof, and different types use different welding settings.\u003c\/p\u003e\u003ch3\u003eCan I install it myself?\u003c\/h3\u003e\u003cp\u003eOnly if you are trained and equipped for welded single-ply work. It requires a hot-air welder, the correct fixings and a fixing pattern for your deck and wind zone. This is normally a job for a specialist flat-roofing contractor.\u003c\/p\u003e\u003ch3\u003eWhat deck can it go on?\u003c\/h3\u003e\u003cp\u003eThe supplier states it is suitable for concrete, timber and metal decks as part of a properly designed mechanically fixed system. The deck must be sound, dry and suitably prepared, and the fixings must suit the deck type.\u003c\/p\u003e\u003ch3\u003eAre fixings and plates included?\u003c\/h3\u003e\u003cp\u003eNo. Fixings, plates, insulation and vapour control layer are sold separately and should be specified for your roof's deck and loading.\u003c\/p\u003e\u003ch3\u003eHow wide are the seams and what is the roll coverage?\u003c\/h3\u003e\u003cp\u003eThe roll is 1.05m wide and 20m long, a nominal 21m². Seam overlap width is set by the manufacturer's system instructions, so the usable coverage is lower than 21m².\u003c\/p\u003e","brand":"Rubber Roof UK","offers":[{"title":"Default Title","offer_id":67521542586559,"sku":"RRUK-TPO-WHT-105X20","price":639.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0598\/1804\/9727\/files\/white-tpo-fpo-single-ply-membrane-installed-flat-roof-welded-seams.jpg?v=1790670456"}],"url":"https:\/\/rubberroofuk.uk\/collections\/single-ply-flat-roof-membranes-tpo-pvc.oembed","provider":"Rubber Roof UK","version":"1.0","type":"link"}