Description
Not every edge detail calls for metal or GRP — a lot of straightforward domestic flat roofs are finished perfectly well with a uPVC edge trim, and it's the budget-friendly option when you're trimming a shed, garage or extension roof rather than a commercial building. This is an injection-moulded, virgin-extruded uPVC edge trim with a built-in water-check kerb that directs run-off toward the gutter rather than letting it cascade down the fascia, sold in trade packs so you're not ordering single lengths one at a time for a multi-length job.
The non-brittle virgin plastic construction holds up to UK weather without the chalking and cracking cheaper recycled-content trims suffer from, and it works with EPDM, felt and most other flat roofing membranes as the finishing detail at the roof edge.
Key benefits
- Injection-moulded virgin-extruded uPVC — non-brittle, consistent finish
- Built-in water-check kerb directs run-off toward the gutter
- Works with EPDM, felt and other flat roofing membranes
- Sold in trade packs (6 or 12 lengths) rather than ordering single 3.5m lengths
- Three colours: Black, White and Anthracite Grey
Where it's used
Roof edge detailing on sheds, garages, extensions and other domestic flat roofs where a uPVC trim suits the budget and the building better than metal or GRP. For a heavier-duty edge system on GRP roofs, see our GRP roof edge trim perimeter packs; for EPDM-specific kerb and drip trims, see our EPDM roof trims range.
Specification
| Pack size | Total length | Profile | Length per piece | Colours |
|---|---|---|---|---|
| 6 lengths | 21m | 65mm edge trim | 3.5m | Black / White / Anthracite Grey |
| 12 lengths | 42m | 65mm edge trim | 3.5m | Black / White / Anthracite Grey |
Ordering & installation guidance
Measure your total roof perimeter and round up to the nearest pack size — lengths join with standard trim jointing clips and are secured with polytop nails or a compatible fixing for your deck. Foam tape or a uPVC-compatible sealant should be used to seal the trim to the deck and membrane. For a matching internal or external corner detail, check compatible corner pieces before ordering if your roof has more than a simple rectangular perimeter.
FAQ
Will this work with my EPDM membrane?
Yes — uPVC edge trim is commonly used with EPDM, felt and other flat roofing membranes as the finishing edge detail.
How do I know which pack size I need?
Measure your total roof perimeter in metres and choose the pack that covers it with the fewest joints — 6 lengths covers 21m, 12 lengths covers 42m.
Do the colours cost different amounts?
No — Black, White and Anthracite Grey are priced the same across both pack sizes.
Is this suitable for a commercial roof?
It's aimed at domestic-scale roofs (sheds, garages, extensions) — for commercial and larger-scale work, our GRP or metal trim systems are the more common specification.
How is it delivered?
Despatched from UK stock as bundled lengths via courier — check the product page at checkout for the current delivery estimate to your postcode.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.