Description
A complete one-piece EPDM rubber roof for a garden room, shed, summerhouse or workshop, finished with uPVC edge trims in black or white: kerb trim on three sides and a gutter drip trim on the long draining edge, so the roof sheds water properly as well as looking tidy.
The membrane is cut to your chosen size before it leaves us, so it goes on as one sheet with no on-site joining, and it is bonded cold with the water-based adhesive supplied — no torch, no flame, no specialist tools. Most garden room roofs are finished in a day.
Why garden room owners buy this kit from us
- ✓ Free UK delivery on every size, trims included — most suppliers add £16.95 or more to ship the trims, which on a £325 kit is a real slice of the price
- ✓ Everything in one box — membrane, adhesive, roller, edge mastic, kerb and drip trims, corners, joining clips and colour-matched pins
- ✓ A proper gutter edge — the drip trim on the long edge throws water into the gutter instead of behind it
- ✓ Cut to your size before dispatch — one sheet, no on-site joining, nothing wasted
- ✓ Dispatched within one working day, tracked to your door
- ✓ 20-year product guarantee and up to 50 years of service
- ✓ Free size check — WhatsApp a photo and your measurements and we confirm the kit before you pay
- ✓ Free manual and install-day checklist, plus UK phone support mid-job
WhatsApp us a photo of the roof and your deck measurements and we will confirm the right kit the same working day — before you order, not after.
Is this the right kit for your roof?
- ✓ A free-standing garden room, shed, office, summerhouse, workshop or log cabin with a flat or low-pitch timber deck from 2.1m × 2m up to 5m × 7.7m
- ✓ The roof drains to a gutter along one long edge, or simply sheds water over that edge
- ✓ You want a neat capped edge in black or white without paying for metal trims
- ✓ You want the whole job in one delivery, fitted in a day with no flame and no specialist tools
The drip trim fits along the long draining edge and kicks water clear of the fascia into the gutter. Kerb trim caps the two short edges and the other long edge, holding the membrane down against wind and hiding the cut line. Four moulded corners, joining clips for any butt joints and colour-matched polytop pins are all in the box, so there is no mitring and no visible screw heads.
Gutter on a short edge instead? Tell us when you order and we will cut the trims to suit at the same price. No gutter at all? The drip trim still works as the draining edge.
Other options: our shed kit is the same membrane without trims for a plain dressed edge; the metal-trim version upgrades the edge to 40mm × 75mm black powder-coated metal; the garage kit steps up to 1.2mm EPDM for larger free-standing roofs. Anything L-shaped or with upstands and outlets is priced line by line in our roof kit calculator.
What is in the box
| 1.0mm EPDM membrane | Supplied as one sheet at your kit size, with no on-site joining required. Black, smooth finish. |
| Water-based deck adhesive | Bonds the membrane to the deck across the whole roof. Low odour, cold applied, no primer needed on timber. |
| Application roller | For spreading the adhesive and bedding the membrane down. |
| Bond & seal edge mastic | Bonds the membrane where it dresses down over the fascia and seals behind the trims. |
| uPVC kerb edge trim — 3 sides | Caps the two short edges and one long edge, in black or white. |
| uPVC gutter drip trim — 1 long edge | Carries water off the roof and clear of the fascia into the gutter, in the same colour. |
| 4 corners + joining clips | Moulded corners for the four roof corners and clips to cover any butt joint in a long run — no mitring. |
| Colour-matched polytop pins | Every fixing the trims need, with heads that match the trim colour. |
What is not included
For a standard free-standing garden building, nothing else is needed. You may want to add:
- An EPDM pipe flashing boot where a flue, soil pipe or cable passes through
- Walkway pads if anyone will regularly stand on the roof
- Timber and firrings to correct the falls — sourced locally, not something we ship
Choosing the right size
The size on this page is the size of the membrane, not your roof.
The rubber has to reach past the deck on every side so it can dress down over the fascia and sit behind the trims. Allow 150mm on each of the four sides — in other words, add 300mm to each of your deck measurements and pick the next kit up.
| Your roof deck measures up to | Kit to order |
|---|---|
| 1.8m × 1.7m | 2.1m × 2m — 6 × 6 ft shed |
| 2.5m × 2.7m | 2.8m × 3m — typical 2.5m-deep garden office |
| 3.2m × 4.2m | 3.5m × 4.5m — 3m × 4m garden room |
| 3.9m × 5.7m | 4.2m × 6m — large studio or workshop |
| 4.7m × 7.4m | 5m × 7.7m — annexe or double room |
All 13 sizes are listed in the selector above, each with the deck it fits. If you fall between two sizes, take the larger one. Surplus membrane trims off in seconds; a sheet 50mm short cannot be rescued. The first figure is the depth (gutter edge to back), the second is the width along the gutter.
Size and price my roof Our calculator prices every line for any shape, including L-shaped and pitched roofs.
Specification
| Material | EPDM (ethylene propylene diene monomer) synthetic rubber |
| Thickness | 1.0mm |
| Construction | Single-ply, supplied as one sheet, cut to size — no on-site joining required |
| Membrane colour | Black |
| Edge trims | Rigid uPVC in black or white: kerb trim on three edges, gutter drip trim on the long draining edge, four corners, joining clips and colour-matched polytop pins |
| Guarantee | 20-year product guarantee on the membrane |
| Life expectancy | Up to 50 years |
| Temperature range | Remains flexible from −40°C to +120°C |
| Standing water | Unaffected by ponding water |
| Suitable decks | OSB3, WBP plywood and other sound timber decking |
| Recommended fall | Flat and low-pitch roofs; minimum fall 1:80 to the gutter edge |
| Fixing method | Fully bonded, cold applied — no heat or naked flame |
| Primer | Not required on sound timber decks |
| Minimum install temperature | 5°C and rising, dry deck, no rain forecast until cured |
| Sizes available | 13 sizes, 2.1m × 2m to 5m × 7.7m |
How it goes on
1. Prepare the deck
Strip any old covering, replace soft boards, punch every nail head below the surface and re-drive proud screws. Fill gaps wider than 5mm, confirm the falls run to the gutter edge at 1:80 or better, then sweep the deck clean and let it dry completely.
2. Relax the sheet, then roller the adhesive
Unroll the membrane over the deck with an even overhang all round and leave it 30 minutes to lose its fold memory. Fold half back and roller the water-based deck adhesive onto the bare deck in a full, even coat.
3. Lay the membrane into the wet adhesive
Roll the folded half back down into the adhesive while it is still wet — this adhesive is not left to go tacky — and sweep it firmly from the fold outwards with a soft broom to drive the air out. Repeat for the other half.
4. Dress the edges
Run a bead of edge mastic along the top of each fascia, dress the rubber down over it and press it firm. Trim the surplus level with the bottom of where the trim will sit.
5. Fit the trims
Fit the four corners first, then cut the straight lengths to meet them: drip trim along the gutter edge, kerb trim on the other three. Pin through the face into the fascia at roughly 250mm centres, leave a 3mm expansion gap at each joint and cover it with a joining clip.
Free downloads — no email address needed
Written by our own team. Print them and take them up the ladder.
Plastic trims, metal trims or no trims?
| uPVC trims (this kit) | Black metal trims | No trims (shed kit) | |
|---|---|---|---|
| Look | Clean capped edge in black or white, matches uPVC windows and fascias | Slim black shadow line, matches anthracite cladding | Rubber dressed over the edge, plain |
| Gutter edge | Proper drip trim included | Flat trim on all four sides | Rubber dressed over |
| Fitting | Pins, corners and joining clips supplied, cuts with a hacksaw | Screws and corners supplied | Nothing to fit |
| Best for | Sheds, summerhouses and garden rooms on a budget | Contemporary garden offices | Sheds and stores |
What garden room owners say
“Installed it over the weekend on my garden room, and it’s surprisingly sturdy. The plastic trims were easy to handle and really gave a neat finish which perfectly matches what I wanted. It’s holding up great despite last week’s heavy rain.”
“Up close, it completely transformed my outdoor studio’s appearance. The integrated edge trims are spot on and give such a neat finish. Our British weather hasn’t made a dent in its performance.”
“Second one I’ve ordered for another shed project. It feels sturdy and well-engineered, especially with the trim included. Quick to put up and watertight even after last week’s downpour.”
Read all customer reviews · Rated Excellent by 1,000+ UK roofers on Trustpilot.
Delivery, dispatch and returns
- Free delivery to UK mainland addresses on every size — including the trims, which most suppliers surcharge.
- Dispatched within one working day — every membrane is cut to your size before it leaves.
- 1–3 working days on a tracked courier once dispatched. Trims travel in a separate rigid pack so they arrive straight.
- Made to measure — the membrane is cut to the size you order, so kits cannot be returned or exchanged once cut unless faulty. Faulty or damaged items are replaced or refunded in full.
- 20-year product guarantee on the membrane.
Frequently asked questions
Can I fit this myself?
Yes. The membrane goes down cold in one piece, the adhesive is a paint-roller job, and the trims pin on with the corners and clips supplied. If you can measure a roof, sweep it clean and use a hammer, you can fit this kit. The free manual covers every stage and you can phone us mid-job.
Which size do I need?
Measure the roof deck, add 300mm to each measurement (150mm per side), and order the kit closest to but not smaller than that figure. A 2.5m × 2.7m deck needs the 2.8m × 3m kit. Between sizes, go up — or WhatsApp us a photo and your measurements and we will confirm the size before you order.
What are the trims made of, and which colour should I choose?
Rigid uPVC, colour-fast and rot-proof, in black or white. White matches uPVC windows, doors and fascias; black disappears against the rubber. The corners, joining clips and pin heads come in the same colour as the trim.
Which edge does the drip trim go on?
The long edge the roof drains to — normally the one with the gutter. Its lip kicks water clear of the fascia into the gutter. Kerb trim goes on the other three edges. If your gutter is on a short edge, tell us when you order and we will cut the trims to suit at the same price.
Is 1.0mm thick enough for a garden room?
Yes, for a free-standing garden building with no foot traffic. 1.0mm EPDM is the standard grade for sheds, summerhouses and garden rooms and carries the same 20-year guarantee. If the roof will be walked on regularly, has upstands against a house wall, or is over 5m × 7.7m, choose the 1.2mm garage kit or use the calculator.
Will the membrane have a join?
Every kit is supplied as one sheet at the size you order, so there is no on-site joining required — nothing to tape or overlap on the roof.
As with all EPDM sheet, larger sizes may contain a factory-made join formed under controlled conditions; these are covered by the product guarantee.
What exactly is included?
A 1.0mm EPDM membrane cut to your size, water-based deck adhesive, an application roller, bond and seal edge mastic, uPVC kerb trim for three edges, uPVC gutter drip trim for the long draining edge, four corners, joining clips and colour-matched polytop pins.
How long does it take to fit?
A typical garden room roof takes a day: about an hour of preparation, 30 minutes letting the sheet relax, an hour or two to bond it, and two hours on the edges and trims. A small shed is an afternoon.
Does the deck have to be dry, and what weather do I need?
Yes. The deck must be completely dry and you want a dry day at 5°C or above with no rain forecast until the adhesive has cured. Water-based adhesive will not bond to a damp deck, and trapped moisture is the main cause of blisters under a new roof.
Can I lay it straight over old felt?
Sometimes, but stripping is better. Overlaying only works if the old felt is fully stuck down, flat, dry and free of mineral chippings. Stripping lets you see the boards and fix the soft ones first.
How long will it last, and is it guaranteed?
The membrane carries a 20-year product guarantee and has a life expectancy of up to 50 years. Felt on the same roof would typically need replacing two to five times over that period.
Does it cope with standing water?
Yes. EPDM is unaffected by ponding water, which suits garden buildings where the fall is often modest. Build in a fall of 1:80 or better anyway so the roof drains to the gutter edge and stays clean.
Do I need a primer?
No. The water-based adhesive bonds directly to sound timber decking — OSB, plywood or planed board.
Which side of the membrane goes up?
EPDM of this type is the same both sides, so there is no wrong way up. Just make sure the side that touches the deck is clean and free of dust.
Can I walk on it once it is fitted?
For maintenance in soft-soled shoes, yes. It is not a walking surface for regular traffic — add walkway pads if you plan to use the roof — and never walk on it wet or frosty.
How much maintenance does it need?
Ten minutes a year: clear leaves and debris off the roof and out of the gutter, and check the trim pins and corners after big storms. There is nothing to re-coat, treat or paint.
When will it arrive?
Every kit is dispatched within one working day, then 1–3 working days on a tracked courier. Delivery is free to UK mainland addresses, trims included.
What if I order the wrong size?
Tell us straight away. Every membrane is cut to your size to order, so once it has been cut it cannot be returned or exchanged unless it is faulty. If you contact us before the membrane is cut we can amend the size free of charge — which is why we would rather size it with you first.
Guides that go with this kit
- How to fit an EPDM roof on a shed or garden room — the full illustrated method
- Fitting edge trims — which trim goes on which edge
- Forming corners — folding rather than cutting
- Drainage and falls
- Types of EPDM membrane — 1.0mm or 1.2mm?
- The full EPDM Learning Centre
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.