Description
Where a flat roof edge sits above a gutter, the finish detail matters: without a proper drip edge, rainwater tracks back under the membrane, stains the fascia and misses the gutter entirely. This black uPVC gutter drip trim gives the membrane a clean termination and a defined drip point, so water leaves the roof exactly where it should — into the gutter.
- 2.5m length of co-extruded rigid uPVC drip trim in black
- Supplied with 8 poly pins and 1 joiner for connecting lengths
- Dress your EPDM membrane over the top of the trim for a neat, weathertight edge
Specification
| Length | 2.5m per trim |
|---|---|
| Material | Co-extruded rigid uPVC |
| Colour | Black |
| Included | 8 x poly pins, 1 x joiner |
| Application | Gutter edge termination for EPDM flat roofs |
Frequently asked questions
How many trims do I need? Measure the total length of roof edge that sits above a gutter and divide by 2.5m, rounding up. Joiners (one included per length) connect the trims in a continuous run.
Does the membrane go over or under the trim? Over. The trim fixes to the roof edge first, then the EPDM membrane is bonded and dressed over the top face so water runs off the trim's drip edge into the gutter.
What do I fix it with? The included poly pins fix the trim through its pre-drilled holes into the roof edge timber.
What about the other roof edges? Edges without a gutter below use a raised edge/kerb trim instead — the drip profile is only for the gutter side of the roof.
Fitting a full roof? Pair this trim with our 1.2mm EPDM rubber membrane and EPDM contact bonding adhesive.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

